Club Cannon Power Co2 Jet (MKII)


Club Cannon Power Co2 Jet (MKII)

$899.99 $699.99

Co2 Jet, 15’ Co2 Hose, 45 Degree Angle Bracket, Hex Wrenches, Mounting Hardware, Co2 Tool, 5 Extra Washers.


    Clamp Options:

    This product comes standard with a 4 pound steel base plate for ground use, as well as a 45 degree angle bracket, which is used for firing at an angle. If you would like to replace the angle bracket with a truss clamp, or purchase both, select your options below. 

    • 0 $
    • 15 $
    • 35 $

    Power Cord:

    This product comes standard with a 6FT Neutrik True1 power cord. If you would like a longer power cord, select your option below. If you would like to purchase daisy chain True1 power cords, you can find those HERE.


    • 0 $
    • 10 $
    • 20 $

    Upgrade Hose Length:

    This product comes with a 15 foot hose. If you would like to upgrade to a longer hose, select your option below.

    • 0 $
    • 50 $
    • 100 $
    • 175 $

    Additional Options:

    Braided Hose Sleeve: Adds an extra layer of abrasion resistance to the Co2 hose. Also improves the appearance and handling. Recommended, but not required. 

    • 25 $


    • 0 $
    • 0 $


The Club Cannon Co2 Jet is a stationary Co2 fixture used to create extraordinary special effects. This Co2 Jet produces a 20-30FT plume of ice cold fog!

Control your Club Cannon Jet with momentary power. This can be achieved by using our Power Pack, A DMX relay pack, or simply any controllable power source.

The 4 pound, steel base plate is designed to keep the jet in place while in use. However, each application is unique, so the base is removable, allowing a clamp to be attached, so the fixture can be hung from trussing.

This Co2 jet can be angled at a 45 degree angle with the supplied angle bracket, or fired vertically. The possibilities are endless, especially when using multiple units together.

The locking Neutrik True1 power cords make transportation and setup easy. Never again worry about the power being unplugged unexpectedly. You can also utilize the True1 power output, and daisy chain power to multiple jets. The True1 cord is also water  and dust resistant, with IP65 certification.

Another great feature of these Co2 jets, is the Co2 passthrough. Each jet has a co2 input and output, so you can daisy chain jets together. This will save you time and money. We recommend supplying Co2 from both ends of the chain. For example; have your tank(s) on both stage left, and stage right. You would then link all the units together, so there is constant pressure throughout the whole system, from left to right. Daisy chain hoses can be found HERE.

The Club Cannon Co2 Jet comes equipped with a high pressure 15′ Co2 hose, (25, 35 & 50 Foot Hoses also available), equipped with a quick connect fitting for easy setup & takedown. Each jet also includes a Co2 tank attachment tool and 5 extra Co2 washers.

It is no surprise that the Club Cannon products are used by the worlds biggest Artists, Nightclubs, Festivals and Theatrical Productions.

PLEASE NOTE: A Siphon Co2 Tank is required for the Club Cannon Co2 Jet to operate properly. More info about Co2 is listed below.



Co2 Info and Suppliers

The Club Cannon can be used with any Siphon CO2 Tank (Sometime referred to as a Siphon Tube or Dip Tank). The Club Cannon will not operate properly with a standard Co2 tank, so you must be sure you are using a Siphon Tank.

CO2 is readily available from any local gas or welding supplier. We recommend using a 20lb or 50lb tank with your Club Cannon. The larger the tank, the more you can use you Club Cannon. You will get approximately 1-2 seconds of spray for each pound of your tanks capacity. If you have questions about getting a CO2 tank, or need advice on a supplier, feel free to email us:

Common suppliers of CO2 Tanks are PRAXAIR and AIRGAS. Both companies have branches nationwide. Use the links below to find a supplier near you.

Use THIS LINK to find the nearest PRAXAIR location.

Use THIS LINK to find the nearest AIRGAS location.

Shipping Options


All USA orders over $100 qualify for free shipping, using UPS ground. Estimated delivery times can be seen by expanding the image on the right. If you would like to upgrade to a faster shipping method, expedited options will be displayed during the checkout process, once you enter the shipping address.

International shipping is calculated during checkout. We ship using UPS, and orders have an estimated delivery time of 3-5 business days. If your order is too large to ship with our standard UPS service, we will contact you to review other shipping options.

International Buyers

Our international Co2 tank fitting is automatically installed with products shipped outside of USA, Canada, Mexico & South America.

International shipments typically arrive in 3-5 business days.

If you have questions please email us.


All Club Cannon products come with a 1 year parts and labor warranty. If you need to make a warranty claim, please email us. More information about our warranty policy can be found on the Terms and Conditions page.