Club Cannon Co2 Jet LED Attachment

Club Cannon Co2 Jet LED Attachment


LED Attachment

6FT Power Cord

1FT Jumper Power Cord

1FT Jumper DMX Cable

Safety Eye Bolt

Barrel Sponge


LED Attachment Manual

    • 0 $
    • 10 $


The Club Cannon LED Attachment is the first of it’s kind, using 6 in 1 LEDs, allowing you to light up the Co2 output any color, including UV! It was designed to attach to the Club Cannon Co2 Jet quickly and easily, with magnets.

Having the LED Attachment as a separate fixture, will allow you to have a modular setup. Customers with non-LED Co2 Jets, can now add the LED function easily, without having to replace any equipment. Certain events may request LEDs, others may not. This makes the LED Attachment an easy solution for any circumstance.

The LED Attachment has 8, 12w LEDs, each capable of producing Red, Green, Blue, White, Amber and Ultra Violet. (6 in 1)

To attach, simply slide the LED Attachment over the barrel of your Co2 Jet, and the magnets will automatically bond to the body of the Co2 Jet. When using the Co2 Jet and LED Attachment inverted, or hung from trussing, we recommend using a safety cable, which can be easily attached to the supplied Eye Bolt, which has a threaded inlet on both sides of the LED Attachment, making it convenient for almost any setup.

The included sponge will rest between the body of the LED Attachment, and the output barrel of the Co2 Jet. The sponge will absorb condensation created during use.

To link the power and DMX signal from your Co2 Jet, the LED Attachment includes short jumper cables, which can be fed from the back of the Co2 Jet, straight into the back of the LED Attachment. No need to run additional power or DMX lines.

Although the LED Attachment was designed for use with the Club Cannon Co2 Jet, it is also suitable for other Co2 Jets on the market as well. The barrel opening is 3″ wide, making it compatible with a number of products.

The universal power input makes this product available for customers anywhere in the world!

Please note: Co2 Jet sold separately. 


  • Attaches Magnetically
  • 8, 12w 6 in 1 LEDs
  • Universal Power Input (85-264v AC)
  • Locking IP65 rated power in/out (16A)
  • 3 pin AND 5 pin DMX in/out
  • 4 DMX Modes (2 CH, 5 CH, 8 CH, 9 CH)

Co2 Info and Suppliers

The Club Cannon can be used with any Siphon CO2 Tank (Sometime referred to as a Siphon Tube or Dip Tank). The Club Cannon will not operate properly with a standard Co2 tank, so you must be sure you are using a Siphon Tank.

CO2 is readily available from any local gas or welding supplier. We recommend using a 20lb or 50lb tank with your Club Cannon. The larger the tank, the more you can use you Club Cannon. You will get approximately 1-2 seconds of spray for each pound of your tanks capacity. If you have questions about getting a CO2 tank, or need advice on a supplier, feel free to email us:

Common suppliers of CO2 Tanks are PRAXAIR and AIRGAS. Both companies have branches nationwide. Use the links below to find a supplier near you.

Use THIS LINK to find the nearest PRAXAIR location.

Use THIS LINK to find the nearest AIRGAS location.

Shipping Options


All USA orders over $100 qualify for free shipping, using UPS ground. Estimated delivery times can be seen by expanding the image on the right. If you would like to upgrade to a faster shipping method, expedited options will be displayed during the checkout process, once you enter the shipping address.

International shipping is calculated during checkout. We ship using UPS, and orders have an estimated delivery time of 3-5 business days. If your order is too large to ship with our standard UPS service, we will contact you to review other shipping options.

International Buyers

Our international Co2 tank fitting is automatically installed with products shipped outside of USA, Canada, Mexico & South America.

International shipments typically arrive in 3-5 business days.

If you have questions please email us.


All Club Cannon products come with a 1 year parts and labor warranty. If you need to make a warranty claim, please email us. More information about our warranty policy can be found on the Terms and Conditions page.