Most Versatile CO2 Jet.
Just got better.
We've spent years perfecting our products, and are excited to introduce the Pro Jet, complete with top tier performance, numerous convenience features, discrete branding and an upgraded interface. The long list of flagship features make it versatile enough to suit applications of all kinds. Nightclub installs, nationwide tours, theme parks, sports applications & more. Check out our gallery to see them in action.View Gallery
DMX CONTROL, SIMPLIFIED.
Our custom DMX interface makes operation simple. Set your address fast, with the quick single digit addressing. Each DMX digit is controlled with an individual button, no more scrolling through 512 channels to set your address. This fixture also supports RDM addressing over DMX lines.
Each jet has a CO2 input and output, so you can daisy chain jets together. This will save you time and money. Have your tanks on both stage left, and stage right and link all the units together, so there is constant pressure throughout the whole system. This allows all tanks to drain equally and provides consistent pressure throughout the system.
QUIETER THAN MOST
Our barrels are equipped with a build in silencer, reducing noise generation up to 30db, without affecting output.
WE DESIGN IT. WE BUILD IT.
It takes a lot to create a reliable, high performance CO2 Jet. We’ve taken customer feedback for the past decade to perfect our products. We work constantly to continue innovating.
We design them. We build them.
Features & Specifications
Take a look at the product description below. If you still have questions, feel free to visit our FAQ page, or reach out to us.
|MAX POWER CONSUMPTION||
|DOWNLOADS||Pro Jet User Manual|
Our custom DMX interface makes operation simple. Set your address fast with the quick addressing feature. Each DMX digit is controlled with an individual button, no more scrolling through 512 channels to set your address. RDM addressing as well!
The 4 pound, steel base plate is designed to keep the jet in place while in use. However, each application is unique, so the base is removable, allowing a clamp to be attached so the fixture can be hung from trussing.
This CO2 jet can be angled at any degree with the easy angle design.
The locking Neutrik True1 power cords make transportation and setup safe & easy. Never again worry about the power being unplugged unexpectedly. You can also utilize the True1 power output and daisy chain power to multiple jets. The True1 cord is also water and dust resistant, with IP65 certification when mated.
Each jet has a CO2 input and output, allowing you to daisy chain jets together. This will save you time and money. We recommend supplying CO2 from both ends of the chain. For example; have your tank(s) on both stage left, and stage right. You would then link all the units together, so there is constant pressure throughout the whole system, from left to right. Daisy chain hoses can be found HERE.
- 5 pin DMX in & out
- Neutrik True1 in & out
- Quick connect CO2 in & out
- V4 barrel with integrated silencer
- Integrated 1/2″ nut for base or clamp
- Easy angle output adjustment
PLEASE NOTE: A Siphon CO2 Tank is required for the Club Cannon Pro Jet to operate properly. More info about CO2 is listed below.
PROUDLY MADE IN THE U.S.A.
The Club Cannon can be used with any Siphon CO2 Tank (Sometime referred to as a Siphon Tube or Dip Tank). The Club Cannon will not operate properly with a standard CO2 tank, so you must be sure you are using a Siphon Tank.
CO2 is readily available from any local gas or welding supplier. We recommend using a 20lb or 50lb tank with your Club Cannon. The larger the tank, the more you can use you Club Cannon. You will get approximately 1-2 seconds of spray for each pound of your tanks capacity. If you have questions about getting a CO2 tank, or need advice on a supplier, feel free to email us: firstname.lastname@example.org
Common suppliers of CO2 Tanks are MATHESON, LINDE and AIRGAS. These companies have branches nationwide. Use the links below to find a supplier near you.
All orders ship from our facility in San Luis Obispo, CA.
We ship Monday-Friday. Shipping cutoff time is 2PM, PST.
Estimated delivery dates
To receive an estimated delivery date for your order, use the shipping calculator on the cart page, or enter your shipping address on the checkout page.
Our international CO2 tank fitting is automatically installed with products shipped outside of USA, Canada, Mexico & South America. International shipments typically arrive in 3-5 business days. If you are looking to order products, and our website does not support shipping to your country, please email us.
All Club Cannon products come with a 1 year parts and labor warranty. If you need to make a warranty claim, please email us. More information about our warranty policy can be found on the Terms and Conditions page.